Ghost 2 Immobiliser Problems

Designed to protect vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that can be fitted without damaging your vehicle. It stops you from starting your vehicle unless you press the correct sequence of keys in your vehicle. This is similar to a mobile password.

Stop/Start

Ghost immobilisers prevent vehicles from being stolen by stopping the engine from running until it is issued the correct PIN code. This is accomplished without any modifications to the vehicle, and is completely undetectable by thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This system is similar to the one automobile manufacturers have used in their cars for years However, thieves cannot add a new key or use key relay technology to bypass it, as they could with factory-installed systems.

Ghost is compatible with any vehicle with an engine, which includes motorhomes, vans, cars, caravans, and bikes. The same system is also compatible with electric cars. It is an excellent alternative to steering wheel locks and wheel clamps and can be installed with minimal effort.

When the Ghost is activated, it will block all buttons in your vehicle and prevent the ignition from being started without a PIN code having been entered first. This can be done using the Android or Apple mobile apps or by entering the code using your key fob. If the incorrect code is entered, the app will display an indicator light. The Ghost will then refuse to let the vehicle to be restarted. This is a great deterrent and when the vehicle isn't initiated, the criminal will then move on to a different area of.

The ghost immobiliser fitting birmingham is a weatherproof, small device that is able to be hidden behind the most difficult-to-access areas of your vehicle. It is extremely simple to install and takes an average of 20-30 minutes per vehicle. It is also very easy to remove should you choose to change your vehicle or hand it in for service or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by some insurers. It is also equipped with an emergency Pin Code override and features the Service/Valet Mode which can be activated using the application's button or by using your key fob.

Disarm

Contrary to the mechanical devices, which are able to be removed, ghost immobilisers are hidden and integrated into the car. Even if they were found in the car, thieves wouldn't be able to start the car. They are almost impossible to bypass or hack. Ghost immobilisers are able to prevent key cloning and signal jamming and devices spoofing. These are methods that thieves use to gain access to vehicles with standard immobilisers.

The immobiliser sends a message to the ECU. If a incorrect code is received and the vehicle does not start since the engine won't start. It is possible to disable a ghost immobiliser installer immobiliser using the aid of a software program, however it is extremely difficult and time-consuming to accomplish this. The software must be installed and used by a authorized installer.

The Ghost immobiliser, a small system, is hidden within the wiring loom of the vehicle. It is invisible to the naked eye once installed. It will not show up on diagnostic systems, there are no LED indicators, and it does not communicate with the engine through the OBD port. It communicates in silence via the CAN data loop.

The system won't allow the vehicle to start until it receives an input PIN number that is specified by the user. The code is entered by pressing buttons on the steering wheels, door panels, or central console. This is a safer way to protect your car since it doesn't require the use of keys or a remote control.

Ghost also has a service mode that is activated through the mobile application. This allows you to give your keys to someone else for servicing or valet parking without entering the disarm sequence.

If your Ghost is in service mode or not, you should not attempt to remove the system by yourself because it could affect the engine and cause damage. It is recommended to speak with an TASSA certified installer who will be able to remove the system safely and properly. Our most recent GHOST immobilisers have a specific fingerprint QR sticker, which is hidden in various areas of your vehicle. They are linked to our security register. In the event that the device is removed and then sold on the black market it will be able to trace the owner of the system.

Anti-Hijack

The anti-hijack function is a very important feature of the Ghost Immobiliser 2. This is a sophisticated key that protects your car from theft. The Ghost system will automatically switch on the hazard lights and stop the car's engine when the ignition is turned on and the vehicle is stationary. This gives the driver or passengers enough time to press a secret security button (depending on the vehicle) before the system is activated and the engine is again allowed to begin.

Contrary to many other systems that simply stop the engine whenever the ignition switch is turned on and on, the Ghost system uses a special controller and timer unit which will close the fuel cut-off valve 14 in the event that it is activated within an agreed-upon time even in the event that the ignition is switched on! The delay time should be long enough to allow the hijacked vehicle owner to drive away and a distance sufficient from the vehicle that is stalled before the system can be activated.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an additional security feature that blocks common hacking methods that are used to hack into modern cars such as relay attacks, key range extending and ECU swapping. This is due to the fact that the Ghost system communicates in a quiet manner and does not emit signals that could be picked up by a thief using RF scanning or code grabbing technology.

The Ghost system comes with the valet or service mode that allows your car to be re-started and driven, without the requirement for a PIN code. This is great when you park your vehicle and only need to leave it briefly for a few minutes, like to open the garage door or place groceries in the boot. The system will end service mode based on speed and time or through the simple PIN code entry process that gives you total security knowing that only you can utilize your vehicle!

Keyless Entry

Many customers are looking for extra security measures because of the rising trend of thefts from cars using contactless. This is particularly relevant for those who have invested time and money into customising their vehicle or own rare/expensive automobiles. Immobilisers with add-ons are a great method to stop this type of theft as they can prevent your vehicle from starting until correct pin code is entered along with your key fob.

Immobilisers are made to work with various vehicle circuits, including ones that control starter motors and fuel pumps. They can also shut off the alarm for cars in order to draw attention and deter potential thieves.

These devices communicate directly with the engine control unit using the CAN data network. They stop the thief from gaining access to it by installing a replacement ECU or by using key programmers. The immobilisers are fitted discretely and do not leave any marks on your vehicle. They are also not detected by hi-tech thieves' tools.

As opposed to other systems that require a specific application or tag that is worn on the person carrying it and a Ghost immobiliser can only be deactivated by pressing a sequence of existing electronic buttons on your steering wheel, door panel and central console, allowing you to choose a custom pin sequence. The pin can be easily changed and makes the device as secure as a bank card. It can also be more difficult to crack since it requires as many as 20 press.

Ghost also has the option of a valet/service mode that lets you deactivate the system when your vehicle is going to be handed over to valet parking or service, enabling it to operate within set parameters, like a 30mph speed limit, so you don't have to worry about your vehicle being driven in reckless manner. The system can be activated using the original key or entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser on the market. It is insurance approved by Thatcham as an optional accessory for your car when installed by one of our certified installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card with your unique QR code as well as an emergency number that is secure, all of which are kept in your purse or wallet of your car.